Licence Plate Light G7

Hello. To replace licence plate lights...

   [IMG]http://i610.photobucket.com/albums/tt189/Sinister115/Before-6.jpg[/IMG]

1. Remove the screw and plastic piece holding the grey trim.

2. Pull off the grey trim.

3. Over each light there is a metal cover held in place by a 10mm bolt.

   [IMG]http://i610.photobucket.com/albums/tt189/Sinister115/Removecover.jpg[/IMG]

   Remove this to expose the back of the light...
   [IMG]http://i610.photobucket.com/albums/tt189/Sinister115/Coverandblot.jpg[/IMG]

4. Unplug the bulb holder and turn to remove...

   [IMG]http://i610.photobucket.com/albums/tt189/Sinister115/unplug.jpg[/IMG]

5. Pull out the old bulb...

   [IMG]http://i610.photobucket.com/albums/tt189/Sinister115/Oldbulb.jpg[/IMG]

   And insert the new one.  [NB before putting it all back together make sure the bulb lights up]
   [IMG]http://i610.photobucket.com/albums/tt189/Sinister115/Newblub.jpg[/IMG]
   These are from Ebay [TOYOTA CELICA 01-05 LED Number Licence Plate light HID £6.99 inc del]

6. Once you confirm it lights up ok (if it doesn't put it in the other way) put it back in, twist to

   lock in place and connect the power.  Put the cover back and bolt secure.
   [IMG]http://i610.photobucket.com/albums/tt189/Sinister115/Brightlight.jpg[/IMG] 

7. Repeat for the other one.

   [IMG]http://i610.photobucket.com/albums/tt189/Sinister115/After-5.jpg[/IMG]

NB:-

You may prefer to connect the buld holder back up before putting it back in place, if not you may drop the buld/holder down the middle of the boot and you will then need to remove the lock section to retrieve it.  :o) [IMG]http://i610.photobucket.com/albums/tt189/Sinister115/Ifitdrops.jpg[/IMG]