View source for How to remove you headlight G7

Tools needed:

1/4" drive 10mm socket with knuckle and extension.

[[Image:RKDE_89.jpg]]

Time taken:

20mins (including photos) but I have done it a few times now.

[[Image:RKDE_90.jpg]]

Remove clips for plastic panel (5 in total).

[[Image:RKDE_91.jpg]]

3 bolts are used to hold the headlight into the car.
Slacken off the 2 that are visible in the engine bay.

[[Image:RKDE_92.jpg]]

Pull the wheel arch lining out a little from behind the bumper, to expose a screw holding the bumper to the wing.

Remove screw.

[[Image:RKDE_93.jpg]]

Pull the bumper away from the wing and you can see the 3rd bolt for the headlight.

[[Image:RKDE_94.jpg]]

Undo bolt (using the knuckle makes it a lot easier).

[[Image:RKDE_95.jpg]]

Now remove the other 2 bolts completely in the engine bay.

Unclip the washer bottle from the headlight casing (offside headlight only).

[[Image:RKDE_96.jpg]]

Partially remove the headlight (it won't go far as the bulbs and height adjuster are still connected).

[[Image:RKDE_97.jpg]]

Remove the bulb connectors by pressing down on the tabs arrowed.

[[Image:RKDE_98.jpg]]
[[Image:RKDE_99.jpg]]
[[Image:RKDE_100.jpg]]
[[Image:RKDE_101.jpg]]

(This is different as I have HID's)

[[Image:RKDE_102.jpg]]

Now you can remove you headlight completely.

[[Image:RKDE_103.jpg]]

And change the bulbs with ease  

[[Image:RKDE_104.jpg]]