Gen6 belt change

From Wiki
Revision as of 09:37, 9 January 2008 by Silver gt (talk | contribs) (added return links)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Alternator Belt:

  • Loosen idler pully/tensioner retention bolt to allow removal of belt
  • Remove belt
  • Fit new belt
  • Tighten idler pully/tensioner and tighten
  • There should be enough slack in the belt, at its tightest point, to be able to twist it roughly 45 degrees. (Toyota spec: 11-14mm deflection (without A/C))


Power Steering Belt: (Alternator Belt REMOVED)

  • Jack up front of car and place on axle stands
  • Remove O/S Lower cover/undertray
  • Loosen tension adjusting arm bolt to enable de-tensioning of belt
  • Remove belt
  • Fit new belt
  • Tighten tension adjusting arm bolt to enable tensioning of belt
  • There should be enough slack in the belt, at its tightest point, to be able to twist it roughly 45 degrees.



Back to Gen 6 Routine Servicing

Back to Gen 6 Maintenance menu

Retrieved from "http://celica-club.co.uk/wiki/index.php?title=Gen6_belt_change&oldid=3386"