Gen6 door card

From Wiki
Revision as of 18:51, 11 May 2007 by silver gt (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Error creating thumbnail: Unable to save thumbnail to destination


  • Firstly remove the triangular tweeter cover by pulling at the top corner. It’s fairly tight so you may need to prise it out.


  • Remove the power window control panel by prising up the bottom edge, and disconnect the plugs from the back of it.


  • Then remove the fixings from the door panel
    • 1 - Two screws with press-on plastic caps.
    • 2 - Five screws.
    • 3 - Three plastic push in studs.
    • 4 - Remove visible screw, remove plastic trim, remove second screw behind.


  • Pull the bottom edge out slightly and unplug the red door light.


  • The panel is now hanging on the top edge of the door, just lift it off.



--silver gt 19:51, 11 May 2007 (BST)

Retrieved from "http://celica-club.co.uk/wiki/index.php?title=Gen6_door_card&oldid=2970"