Difference between revisions of "Gen6 door card"

From Wiki
Jump to: navigation, search
 
m
 
Line 23: Line 23:
  
  
--[[User:silver gt|silver gt]] 19:51, 11 May 2007 (BST)
+
 
 +
 
 +
 
 +
 
 +
----
 +
 
 +
[[Generation_Six|back to gen6 Mods]]
 +
 
 +
 
 +
 
 +
----
 +
 
 +
[[User:silver gt|silver gt]] 19:51, 11 May 2007 (BST)

Latest revision as of 18:21, 27 August 2008

Error creating thumbnail: Unable to save thumbnail to destination


  • Firstly remove the triangular tweeter cover by pulling at the top corner. It’s fairly tight so you may need to prise it out.


  • Remove the power window control panel by prising up the bottom edge, and disconnect the plugs from the back of it.


  • Then remove the fixings from the door panel
    • 1 - Two screws with press-on plastic caps.
    • 2 - Five screws.
    • 3 - Three plastic push in studs.
    • 4 - Remove visible screw, remove plastic trim, remove second screw behind.


  • Pull the bottom edge out slightly and unplug the red door light.


  • The panel is now hanging on the top edge of the door, just lift it off.






back to gen6 Mods



silver gt 19:51, 11 May 2007 (BST)