Difference between revisions of "Gen6 facelift immobiliser"
From Wiki
(New page: =ENGINE IMMOBILISER SYSTEM= The engine immobiliser system is a theft prevention system. When you insert the key in the ignition switch, the transponder chip in the key's head transmits an...) |
|||
| Line 1: | Line 1: | ||
| − | = | + | =RESYNCING AND RESETING THE ALARM FOB= |
| − | |||
| − | |||
| − | + | '''Resync''' | |
| − | ' | + | With all the doors closed and the key removed (doesn't matter if the doors are locked or not), press both buttons together and hold them down for two seconds. |
| + | |||
| + | |||
| + | |||
| + | '''Reset''' | ||
| + | |||
| + | Remove the battery from the fob, press the arm button down for at least ten seconds, then replace the battery and reassemble the fob. Now carry out the resync as above. | ||
| Line 16: | Line 20: | ||
---- | ---- | ||
| − | |||
Revision as of 09:45, 23 June 2008
RESYNCING AND RESETING THE ALARM FOB
Resync
With all the doors closed and the key removed (doesn't matter if the doors are locked or not), press both buttons together and hold them down for two seconds.
Reset
Remove the battery from the fob, press the arm button down for at least ten seconds, then replace the battery and reassemble the fob. Now carry out the resync as above.
