Difference between revisions of "Gen6 spark plugs"
From Wiki
m (added return links) |
|||
| Line 14: | Line 14: | ||
HT Lead Resistance: <25K Ohm PER Lead+999 | HT Lead Resistance: <25K Ohm PER Lead+999 | ||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | ---- | ||
| + | |||
| + | [[gen6 servicing|Back to Gen 6 Routine Servicing]] | ||
| + | |||
| + | [[Generation_6|Back to Gen 6 Maintenance menu]] | ||
Revision as of 09:40, 9 January 2008
Spark Plug Replacement:
- Remove HT leads from sparkplugs located on the rear side of the engine noting cylinder assignment.
- Remove plugs from cylinder head
- Check gap of new plugs using feeler gauge (NGK Spec: 0.8mm although this should be preset)
- If adjustment is required use a soft faced mallet to adjust. Don’t ever leave feeler gauge in whilst adjusting gap.
- Smear a small amount of copper grease or molybdenum grease around the threads, avoiding leading 3 threads.
- Fit plugs into cylinder head and torque to 18Nm (13.3 lb-ft)
- Refit HT Leads
Recommended NGK plugs for 3S-GE = BKR6EP-82215
Gap is preset
HT Lead Resistance: <25K Ohm PER Lead+999
