Difference between revisions of "Engine Diagnostic Codes"

From Wiki
Jump to: navigation, search
(New page: To check the engine diagnostic codes, bridge terminals TE1 & E1 with a piece of wire (or a paperclip) in the Diagnostics box located on the right hand side of the engine bay near the bulkh...)
 
 
(5 intermediate revisions by the same user not shown)
Line 2: Line 2:
  
 
Then turn the ignition 2 clicks until the engine light illuminates, count the flashes, each code is 2 digits long so you will get a series of flashes, then a pause, then a series of flashes, this will indicate the 1st & 2nd digit of the code. If there are multiple codes there will be a long pause then the next code will be displayed.
 
Then turn the ignition 2 clicks until the engine light illuminates, count the flashes, each code is 2 digits long so you will get a series of flashes, then a pause, then a series of flashes, this will indicate the 1st & 2nd digit of the code. If there are multiple codes there will be a long pause then the next code will be displayed.
 +
 +
 +
[[Image:3SGTE Fault Codes 1.jpg]]
 +
 +
[[Image:3SGTE Fault Codes 2.jpg]]
 +
 +
--[[User:Rpsmith79|Rich]] 21:31, 26 December 2010 (UTC)
 +
 +
----
 +
 +
[[Generation 5|Back To Gen 5 Maintenance]]<br>
 +
[[Generation Five|Back To Gen 5 Modification]]

Latest revision as of 07:13, 15 June 2011

To check the engine diagnostic codes, bridge terminals TE1 & E1 with a piece of wire (or a paperclip) in the Diagnostics box located on the right hand side of the engine bay near the bulkhead.

Then turn the ignition 2 clicks until the engine light illuminates, count the flashes, each code is 2 digits long so you will get a series of flashes, then a pause, then a series of flashes, this will indicate the 1st & 2nd digit of the code. If there are multiple codes there will be a long pause then the next code will be displayed.


Error creating thumbnail: Unable to save thumbnail to destination
Error creating thumbnail: Unable to save thumbnail to destination

--Rich 21:31, 26 December 2010 (UTC)


Back To Gen 5 Maintenance
Back To Gen 5 Modification