Difference between revisions of "Fitting a removlable bike rack G7"
From Wiki
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | This | + | This fitment of the universal halfords bike rack on the G7. |
There are 6 mounting points for this unit, it has | There are 6 mounting points for this unit, it has | ||
| Line 7: | Line 7: | ||
* Two lower mounts | * Two lower mounts | ||
| − | The first thing when fitting the unit is to open the boot and fit the top mounts they | + | *The first thing when fitting the unit is to open the boot and fit the top mounts they simply slide through on the outer side of the hinges. Photos below; |
| − | [[Image:RKDE_24. | + | [[Image:RKDE_24.JPG]] |
| − | [[Image:RKDE_25. | + | [[Image:RKDE_25.JPG]] |
| + | Once fitted you will close the boot, NOTE: you can not open the boot from this point on! | ||
| + | |||
| + | *with the boot lid close insert the side clips, this simply clips around the boot lid, it is coated so no damage will be done. | ||
| + | [[Image:RKDE_23.JPG]] | ||
| + | |||
| + | *fit the lower mounts, this is where it looks like this was designed for the car, you will notice under the car there is a hole just where you need it to be. The metal loops on the nylon strap fit in here and are very secure! do this on both sides. | ||
| + | [[Image:RKDE_27.JPG]] | ||
| + | |||
| + | *Open the rack to fit and attack straps to according clips, do not tighten until they are all on then start to centre the rack by tightening the straps. | ||
| + | [[Image:RKDE_28.JPG]] | ||
| + | NOTE; the lower part of the rack should sit nicely below your number plate. | ||
| + | |||
| + | *Rear view out the car | ||
| + | [[Image:RKDE_31.JPG]] | ||
| + | |||
| + | *Packing away, fits in your boot or any where! | ||
| + | [[Image:RKDE_26.JPG]] | ||
| + | |||
| + | |||
| + | |||
| + | ---- | ||
| + | YOUR DONE! | ||
| + | |||
| + | Place your bike on then tighten all the straps and tie up. stand back and look, then its time for some fast down hill action :) | ||
| + | |||
| + | [[Image:RKDE_29.JPG]] | ||
| + | [[Image:RKDE_30.JPG]] | ||
Latest revision as of 13:28, 31 December 2006
This fitment of the universal halfords bike rack on the G7.
There are 6 mounting points for this unit, it has
- Two top mounts
- Two side mounts
- Two lower mounts
- The first thing when fitting the unit is to open the boot and fit the top mounts they simply slide through on the outer side of the hinges. Photos below;
Error creating thumbnail: Unable to save thumbnail to destination
Error creating thumbnail: Unable to save thumbnail to destination
Once fitted you will close the boot, NOTE: you can not open the boot from this point on!
- with the boot lid close insert the side clips, this simply clips around the boot lid, it is coated so no damage will be done.
Error creating thumbnail: Unable to save thumbnail to destination
- fit the lower mounts, this is where it looks like this was designed for the car, you will notice under the car there is a hole just where you need it to be. The metal loops on the nylon strap fit in here and are very secure! do this on both sides.
Error creating thumbnail: Unable to save thumbnail to destination
- Open the rack to fit and attack straps to according clips, do not tighten until they are all on then start to centre the rack by tightening the straps.
Error creating thumbnail: Unable to save thumbnail to destination
NOTE; the lower part of the rack should sit nicely below your number plate.
- Rear view out the car
Error creating thumbnail: Unable to save thumbnail to destination
- Packing away, fits in your boot or any where!
Error creating thumbnail: Unable to save thumbnail to destination
YOUR DONE!
Place your bike on then tighten all the straps and tie up. stand back and look, then its time for some fast down hill action :)
Error creating thumbnail: Unable to save thumbnail to destination
Error creating thumbnail: Unable to save thumbnail to destination
